Dolphin Mug

  • Everyday Low Price
    Tags: cup, mug, sea life mug


    MB1448 Dolphin Mug in Ceramic Cone 04 Bisque by Mayco

    All of our bisque is fired to a cone 04 and is ready to paint.

    6 W x 5 H x 3.63 Dia.

    This item is unpainted.

    You are purchasing an unfinished, Ready to Paint, Piece of Ceramic Pottery

    Products Used


    • MB-1448 Dolphin Mug


    • FN-011 Light Blue, FN-041 Medium Blue, SC-15 Tuxedo, SC-16 Cotton Tail, SC-60 Silver Lining, SG-404 Blue, S-2101 Crystal Clear Brushing

    Decorating Accessories

    • CB-604 #4 Soft Fan, CB-106 #6 Script Liner, CB-110 #10/0 Mini Liner, AC-230 Clay Carbon Paper, BT-910 Synthetic Sponge

    Miscellaneous Accessories


    1. Begin with properly fired shelf cone 04 bisque. Moisten a clean sponge and wipe bisque to remove any dust.
    2. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-011 Light Blue to the outside of the mug.
    3. Once the glaze is completely dry, use AC-230 Clay Carbon Paper to transfer the design onto the mug.
    4. Using SG-404 Blue Designer Liner, go over the traced design.
    5. Using a CB-106 #6 Script Liner, apply 2 coats of SC-16 Cotton Tail to the belly of the dolphin.
    6. Next, apply 3 coats of SC-60 Silver Lining to the rest of the dolphin.
    7. Using a CB-110 #10/0 Mini Liner, apply 1 coat of SC-15 Tuxedo to the lines on the dolphin.
    8. Using a CB-604 #4 Soft Fan, apply 3 coats of FN-041 Medium Blue to the inside of the mug.
    9. Be sure the waves are completely dry, then apply 1 coat of S-2101 Crystal clear brushing over them.
    10. Let dry completely.
    11. Stilt and fire to shelf cone 06/05.

    Reviews (0)

    Write a review

    Note: HTML is not translated!
        Bad           Good